Language
Deutsch
English
Русский
Home
Introduction
Safety
Mind with flammable refrigerants
Use of flammable refrigerants of the A2L safety classes and A3 (e. g. R1234yf or R290)
Work on systems with A3, A2L and B2L refrigerants
System design with highly flammable refrigerants
Suspecion of burnt refrigerant in terminal box
Dismounted components from systems with A3 or A2L refrigerants
Used oil from systems with A3 or A2L refrigerants
Operation with frequency inverter
Refrigerating capacity and system efficiency
Application range
Selection
Selection with the
Bitzer Software
Compressor motors
Special voltage motors
Suitable protection devices
Tandem and trio operation
Tandems with FI on each compressor
Tandems with FI on the primary compressor (50 Hz)
Tandems with FI on the secondary compressor (50 Hz)
Tandems with FI on the primary compressor (60 Hz)
Tandems with FI on the secondary compressor (60 Hz)
Trios with FI on each compressor
Trios with FI on compressor 2 (50 Hz)
Trios with FI on compressor 2 (60 Hz)
Electrical installation of compressor and frequency inverter
Arrangement of the wiring
LSPM motor
Commissioning
Configuration of the frequency inverter
Start sequence
Cycling rate and minimum running times
Document as PDF