- myBITZER
- BITZER SOFTWARE
-
ePARTS
A funcionalidade ePARTS faz com que seja mais fácil e rápido encontrar as peças de substituição adequadas para os nossos produtos. As peças encontram-se listadas segundo a gama de modelos e são apresentadas como um desenho simples ajustável, de vista explodida. O software é gratuito. Como cliente direto da BITZER registado na myBITZER, beneficia de funcionalidades avançadas adicionais, como por exemplo a capacidade de consultar online os preços de cada peça de substituição.
- Documentação
- Contato
- Germany (de)
BOOST YOUR SYSTEM'S VALUE
Delivery address
IQ MODULE CM-RC-02
ECOLINE reciprocating compressors of the C3 series or later installed at the Schkeuditz factory will come with the IQ MODULE CM-RC-02. It simplifies and optimises compressor installation, operation, maintenance and retrofitting for refrigeration, air conditioning and heat pump systems. The IQ MODULE CM-RC-02 not only assumes the functions once covered by the compressor protection device, but also offers a new world for operating the installed compressor functions as well as new digital services. The range of functions can be individually adapted thanks to extension boards.
For the IQ MODULE we offer a broad variety of documentation and tools:
- Quick start guides
- Quick start guide - protection mode
- Quick start guide - compressor operation mode
- Documentation
- Operating instructions
- Technical information
- BEST software and BEST app
- Product information
- BTZER SOFTWARE
Frequently asked questions (FAQ)
Here you find some frequently asked questions. In case of further questions, please contact us.
Contact
-
What is preconfigured on the IQ MODULE CM-RC-02 ex-factory?
The IQ MODULE CM-RC-02 will be send out ex-factory with the newest Firmware Version. The Compressor type and compressor serial number are preconfigured on the device.Additionally for the compressor operation mode, the default refrigerant and the motor starter function part winding is preselected. Without an extension board ordered accessory will be configured but not mounted/wired.
-
When is the refrigerant type selection needed?
The refrigerant type is necessary, when pressure transducers are mounted on the IQ MODULE CM-RC-02. For the calculation of temperatures based on the measured pressure values, the refrigerant type is needed.
-
Is it possible to change the operation mode on the IQ MODULE CM-RC-02 after shipment?
Yes, for BEST and BEST APP a configuration parameter in the user menu is available. The user can changed between the protection mode (SE-B) and the compressor operation mode.
-
Will the IQ MODULE CM-RC-02 available as 24V variant?
The CM-RC-02 will not be available as 24 V variant. For 24V systems the SE-B 24V variant will still be available.
-
Will the positions of the in/out connections be maintained as on the old models?
The CM-RC-02 with extension board Premium can replace all the functions of CM-RC-01 as the same in- and outputs are supported. The positioning of the in- an outputs are slightly changed. The wire length of the sensors and actors do not need to be adapted.
-
Will the compressor fixing points distances be the same as the old models?
The mounting position of the module housing will be the same. The Module itself has new fixing points and therefor the need of the updated module housing.
-
Will the CE3S family only have an increase in the dimensions of the electrical box in the 3 dimensions, while on the other families we "only" have an increase in the height of the box?
Yes, only CE3S will have an adapted motor terminal box.
-
What is the HP switch contact a kind of relay. Is it a reed contact?
It is a relays contact. Same type of relays also used for the motor contactors and status output.
-
Are Modbus addresses the same as with the CM-RC-01?
Yes, same register address for all existing Modbus Parameter. Additionally, implementation of the CM-RC-02 regarding start, stop, reset status word is exactly the same as for the CM-RC-01 to ensure an easy switch CM-RC-01 to CM-RC-02.
-
Can a PTC140 discharge gas temperature sensor used in combination with IQ MODULE CM-RC-02?
Yes, the PTC140 Sensor can be implemented in row with the PTC Sensor for the motor temperature monitoring.
-
When a new compressor is ordered to replace an old one, can the IQ MODULE CM-RC-02 in SE-B mode be integrated without modification from the electrical diagram?
Yes, the same inputs and outputs are available on the IQ MODULE CM-RC-02. A rewiring on the system side is not necessary. In the Quick-Start Guide protection mode (SE-B) the implementation is described in detail.
-
Is it possible to implement the IQ MODULE CM-RC-02 with 0..10V signal for VARISTEP?
Yes, the IQ MODULE CM-RC-02 can either be operated with a digital start/stop signal and 0..10V analog signal or via Modbus when VARISTEP is connected.
HOW TO VIDEOS
The maintenance instructions KW-242-1 contains short video instructions on mounting, retrofitting and the configuration of the CM-RC-02 with the BEST SOFTWARE.
Find the document below - please use the navigation within the tool to browse through the information.