BEST Software 모든 BITZER IQ 장치에 하나의 소프트웨어 사용

버전2.19다운로드

BEST APP iOS BEST APP Android

BITZER_BEST_Software_MASTER_EN_FIN_1080p (MP4, 437 MB)

다음 제품이 지원됩니다

IQ MODULE CM-RC
(Operation, monitoring and protection device for reciprocating compressors)
IQ MODULE CM-SW-01
(Operation, monitoring and protection device for screw compressors)
VARIPACK
(External BITZER frequency inverters)
CSV
(Compact screw compressors with integrated frequency inverter)
ECOLITE
(Air cooled condensing units with VARISTEP capacity control)
ECOSTAR
(Air cooled condensing units with frequency inverter driven compressors)
SE-i1
(Monitoring and protection device for screw compressors)
VARISPEED
(Reciprocating compressors with integrated frequency inverter)

Languages

English
Chinese
Danish
Estonian
Finnish
French
German
Italiano
Japanese
Korean
Portuguese
Russian
Swedish
Spanish
Vietnamese

System requirements

PC with Windows7 ≥SP1 /8/8.1/10/11
Microsoft .NET-Framework 4.8 is required. In case an internet connection is available during installation, it is installed automatically. Otherwise it can be downloaded here
Depending from the device to connect to: USB port, Ethernet port or Bluetooth

Required additional hardware and connection possibilities

IQ MODULE CM-RC
- Bluetooth (Standard in the devices)
- or BEST converter

IQ MODULE CM-SW-01
- Bluetooth (Standard in the devices)
- or BEST converter

VARIPACK
- BEST converter
- or Ethernet cable (Only by FDU .. FKU models)

CSV
- Bluetooth (requires control board of the 2nd generation and firmware version 1.91 or newer)
- BEST converter

ECOLITE
- BEST converter and additional cable for the ECOLITE
  (part. no. of the cable 34411710)

ECOSTAR
- Bluetooth (Standard in LHV5E/LHV7E)
- or Mini USB cable

SE-i1
- BEST converter

VARISPEED
- BEST converter

The BEST converter can be ordered via BITZER part no. 34431402.
The license agreements can be found here

Relevant innovations in version 2.18 (December 2023)
- New auto-updater
- - The new auto-updater feature informs about new versions of BEST by a tray icon and pop-up information. Thereby BEST must not be started anymore to check for new versions
  - In addition, BEST can be started via the tray icon and the release notes of BEST can be shown
- myBITZERcloud functionality extended
- - The new features require that the used myBITZER user has been registered for the BDN (BITZER DIGITAL NETWORK). When this is the case, the name of the company will be shown below the user when being logged into myBITZER with BEST
  - Automatic sorting of the uploaded files: BEST files from products which are registered in the BDN, will be sorted according the Site/Sub-Site/System/Equipment structure
  - Sharing within the company: BEST files from products which are registered in the BDN, can easily be shared with all users of the same company. There is also a checkbox available which allows to share newly uploaded files automatically within the company
- New diagram: Application Envelope Heatmap
- - Datalogs of compressors with application envelope protection do now also get visualized in the application envelope. The operating point as well as events like start, stop and alarms are shown
- Operational graph: Visualization of alarm durations and further improvements
- Modbus documentation extended and improved
- IQ MODULE CM-RC-02 integrated
- New for CSV
- - R515B released as standard refrigerant
  - Bug fix: BEST 2.17 didn´t show the version of the firmware in case of firmware version 1.75 or older. In that case, also an update of the firmware wasn´t possible
- New for VARIPACK
- - ORBIT PRO compressors GSP60120ZL .. GSP80485ZL with the standard motor version 4 added
  - Compact screw compressors CSW10563-210 .. CSW10593-400 with motor version 40D and 38D added
  - Motor version 3PU added for the relevant compressors
- New for IQ MODULE CM-RC-01
- - 8-cylinder CO2 compressors 8DTE-120 and 8DTE-140 added
- New for IQ MODULE CM-SW-01
- New for ECOSTAR
  - Firmware version 5.1.1.0 integrated
- New for SE-i1
  - Firmware version 2.24.124.00 integrated
  - CSH2T compact screw compressors for high-temperature heat pump applications added. CSH2T9573-210 and CSH2T9583-240 for the refrigerant R1233zd(E) and CSH2T9573-240 and CSH2T9583-280 for the refrigerant R245fa
  - Refrigerant R245fa added for the CSH.3 compressors CSH7553-50 .. CSH951130-320 with motor version 2
  - Bug fix: The extended envelopes, introduced with BEST 2.12 SP1, were missing for the compressor model CSH8563-125Y
Relevant innovations in version 2.17 (December 2022)
- Like it is already by the CSV and VARIPACK of the 2nd generation, also for the CM-RC-01, CM-SW-01 as well as SE-i1 all released firmware versions are now included in BEST and easily selectable via a drop-down list
- New for VARIPACK of the 2nd generation
  - Semi-hermetic screw compressors of the HS.95 series, HSK9573-180 .. HSK95103-320, HSN9583-240 and HSN95103-280 added with the motor versions 35D, 38D, 40D and 65S
  - P-version of the 2-stage reciprocating compressors S4TP-5.2 .. S6FP-30.2 added
  - For ECOSTAR dedicated compressors 4DE-7.F .. 4NE-14.F added
  - Automatic pre-configuration of the for scroll and transcritical CO₂ compressors recommended hold frequency after start
- New for IQ MODULE CM-RC-01
  - Firmware version 2.23.287.00 integrated
  - 8-cylinder CO₂ compressors 8FTE-100, 8FTE-140 and 8CTE-140 added
  - ECOLINE 2 cylinder compressors 2KES-05 .. 2CES-4 and 2EESH-2 .. 2CESH-4 made available as standard
- New for IQ MODULE CM-SW-01
  - HS.95 compressors
    - Compressor HSK9593-300 as successor for the compressor HSK9593-280 added
  - OS compressors
    - The phase monitoring can be activated by the motor starter functions “Direct on Line (DOL)”, “Part Winding (PW)” and “Star Delta”
  - New for ECOSTAR
    - Firmware version 5.1.0.0 integrated
Relevant innovations in version 2.16 SP1 (June 2022)
- Bug fixes
Relevant innovations in version 2.16
- First version which officially supports Windows 11
- Datalog features
  - Livelogs: Alarms get shown on the Operational Graph when created with BEST version 2.16 or newer
  - Devicelogs: BEST activities like the time range BEST was connected, firmware updates as well as parameter changes are visualized on the Operational Graph when supported by the devicelog
- New for CSV
  - Firmware version 2.22 integrated
- New for VARIPACK of the 2nd generation
  - Firmware version 2.53 integrated
  - Refrigerants R469A and R473A added
- New for IQ MODULE CM-RC-01
  - Transcritical ECOLINE 4 cylinder compressors released for VARISTEP operation down to 10 % (before 25 %, only ECOLINE+ compressors were already released for 10 %)
  - OLM-IQ support for transcritical compressors added
- New for IQ MODULE CM-SW-01
  - CSW105 compressors
    - Compressors CSW10563-210, CSW10563-240, CSW10573-240 and CSW10573-290 with the refrigerants R134a, R450A, R513A. R1234yf, R1234ze and R515B added
  - HS.95 compressors
    - Compressor HSK9573-180 and HSK9583-210 with the refrigerants R134a, R450C, R513A and R1234yf added
    - Compressor HSK9573-240 and HSK9583-280 with the refrigerants R22, R134a, R404A, R407A, R407F, R448A, R449A, R450A, R454C, R507A, R513A and R1234yf added
    - Compressor HSN9583-240 with the refrigerants R22, R404A, R407A, R407F, R448A, R449A, R454C and R507A added
- Bug fix
  - VARIPACK 2nd generation: The bubble line data instead of dew line data were transferred for zeotropic refrigerants (R4…) with the previous BEST versions
Relevant innovations in version 2.15 SP1 (November 2021)
- Bug fixes
  - SE-i1: For some compressors, some refrigerants were not selectable for newer compressor serial numbers
  - VARIPACK 2nd generation: The scaling of the parameter “Hold time on hold frequency” was wrong about factor 10. A configured value of e.g. 10 s was shown as 100 s
Relevant innovations in version 2.15 (November 2021)
- New language: Vietnamese
- Documentation tab
  - Modbus documentation is now available in German language
  - Maintenance Instructions
    - The for the specific product relevant maintenance instructions have been implemented in BEST
    - They can be shown online as well as downloaded for offline availability. This is specifically from advantage, when no internet connection is available on side
- New for CSV
  - Firmware version 2.21 integrated
  - Compressor types CSV.24-125MY-40M and CSV.25-160MY-40M with permanent magnet motor added
- New for VARIPACK
  - Open type reciprocating as well as screw compressors added for the VARIPACK of the 2nd generation. The motor data can be configured individually
  - Added the motor versions 2DU, 4SU, 40D and 45S for the transcritical ECOLINE compressor 2MTE-4 .. 2KTE-7 and 2NU, 4PU, 20D, 20P, 25P, 35D, 40D, 40S, 45S for the compressors 4JTE-10 .. 4CTE-30. For the 6FTE-35 .. 6CTE-50 the motor version 35D has been added
- New for ECOSTAR
  - Firmware version 5.0.3.0 integrated
- New for IQ MODULE CM-RC-01
  - Refrigerants R407H and R452A added for the ECOLINE compressors
  - Refrigerants R134a, R245fa, R404A, R407C, R407F, R407H, R448A, R449A, R454C, R455A, R513A, R1234ze(E), R515B (for motor version 2) and R1234yf added for the ECOLINE H-Series compressor
- New for IQ MODULE CM-SW-01
  - Firmware version 2.20.103.00 integrated
  - CSW105 compressors
    - Application envelopes for all refrigerants extended. For details see the firmware release notes 2.20.103.00
    - CSW105 compressors released for the refrigerant R450A and R515B
  - HS.95 compressors
    - Refrigerant R454C released for the HSN95103-280 and HSK9593-280
  - OS compressors
    - Application envelope of the OSKA95 compressors essentially extended, allowing to apply it as a booster compressor. Additionally, a further extended envelope has been added for applications with oil pump. For details see the firmware release notes 2.20.103.00
    - OSKAB85 Booster compressors added with application envelopes for the operation with and without oil pump. For details see the firmware release notes 2.20.103.00
- New for SE-i1
  - CSHP compressor series CSHP6553-50 .. CSHP9593-300 with the refrigerant R290 added
  - HSNP compressors HSNP7451-60 .. HSNP8591-160 with the refrigerant R1270 added
버전 2.14 (SP2) 의 관련 혁신 기술
- Bug fix of version 2.14 SP1
  - The configuration of the refrigerant didn´t properly work for the devices CM-RC-01, CM-SW-01 and SE-i1
버전 2.14 (SP1) 의 관련 혁신 기술
- Bug fixes of version 2.14
  - When trying to overwrite an existing BEST file, the BEST file wasn´t saved
  - VARIPACK IP55/66: Default settings were partly missing
  - VARIPACK IP20; FDU .. FKU: Operating hours were shown in seconds instead of hours, unit of the ramp-up and ramp-down time were missing
버전 2.14 의 관련 혁신 기술 (2021년 06월)
- New language: Spanish
- New for VARIPACK
  - Support for the VARIPACK IP55/66 added
  - Subcritical CO₂ compressor 2LSL-1 added
  - Subcritical ECOLINE compressors 4FME-9 and 4EME-10 added
  - ORBIT FIT compressors GED80421 and GED80485 added
  - Motor version 3 added for the ORBIT FIT compressors GED80295 .. GED80485
- New for CM-RC-01
  - Firmware version 2.20.282.00 integrated
  - Subcritical ECOLINE compressors 4FME-9, 4EME-10, 4TME-30 and 6TME-50 added. The 4FME-9, 4EME-10 and 4TME-30 are available in Standard and Marine version
- New for CM-SW-01
  - Started to add the compressor serial number dependent slider end points of all the compressors produced until the build date of BEST. This allows to configure new CM-SW-01 modules for a specific compressor without needing to request the slider end points from BITZER
  - Refrigerant R454C released for the HSK95103-320
- New for SE-i1
  - Firmware version 2.20.119.00 integrated
  - CSW motor version 4 compressors CSW8573-80 .. CSW95103-210
  - Refrigerant R454C released for the HS compressors
버전 2.13 (SP1) 의 관련 혁신 기술 (2021년 01월)
- Bug fix: Correction of the compressor serial number dependant parameter handling of the CM-SW-01 and SE-i1 in conjunction with compressors produced from January 2021 on
버전 2.13 의 관련 혁신 기술 (2020년 12월)
- Transfer while running: Several parameters can now be changed while the compressor is running
- Documentation tab
  - Modbus toggle descriptions added
  - Alarms and Modbus Data can now be exported as PDF and CSV
- New for CSV
  - The last 10 faults including their time stamp as well as number of occurrences are now directly visible without requiring to download and decode the datalog
  - Service pack firmware version 1.56 integrated for the CSVW26-200MY field test compressors
- New for VARIPACK
  - Refrigerant R515B added
  - ECOLINE CO₂ compressors 4FME-7, 4EME-9, 4DME-10, 4TME-20 and 4PME-25 added with the motors 40S, 20D. For the 4TME-20 and 4PME-25 additionally their standard motor 40P as well as 20P is selectable
  - Motor versions 40S and 20P added for the ECOLINE CO₂ compressors 6TME-35 and 6PME-40
  - ECOLINE H-Series compressors 2CESH-3 .. 6FEH-50 added
  - Compact screw compressors CSH7673-70 .. CSH96113-320 (CSH.6) added with the different motor versions available
  - Motor versions 20P, 38P and 45P added for the relevant compressors of the CSH.5 and CSW compressor series
- New for ECOLITE
  - Support for the 2nd generation of ECOLITE added
- New for IQ MODULE CM-RC-01
  - New firmware version 2.10.272.00 integrated
  - Soft starter is now selectable as “Motor starter function” (supported from firmware version 2.5.249.00 on)
  - Subcritical ECOLINE compressors 4FME-7, 4EME-9, 4DME-10, 4TME-20 and 4PME-25 added in Standard and Marine version
  - Marine version of the Transcritical ECOLINE compressors 4PTE-6 .. 4CTE-30 as well as ECOLINE+ compressors 4PTEU-6L .. 4CTE-30L added
  - ECOLINE H-Series compressors introduced for the refrigerant R1234ze(E) in motor version 1 area replacing the standard ECOLINE series
  - Refrigerant R515B released for the standard ECOLINE compressors with motor version 2 and the ECOLINE H-Series for motor version 1
- New for IQ MODULE CM-SW-01
  - CSW105 compressors
    - Compressors CSW10583-290 and CSW10583-360 added
    - Application envelopes for the compressor CSW10593-400 and the refrigerants R134a, R513A and R1234yf extended in the direction of lower evaporating temperatures
    - CSW105 compressors released for the refrigerant R1234ze(E)
  - HS.95 compressors
    - Application envelopes for the HS.95 compressors with serial number > 1099000000 and the refrigerants R22, R404A, R448A, R449A, R507A extended in the direction of higher condensing temperatures
- New for SE-i1
  - CSH.5 compressors released for the refrigerant R515B
버전 2.12 (SP1) 의 관련 혁신 기술
- New for VARISPEED
  - Compressors 4PTE-7.F3K, 4MTE-7.F4K and 4KTE-10.F4K added
- New for CSV
  - Firmware version 2.13 integrated
  - The CSVH38-290Y and CSVW38-290Y field test compressors are now also supported by the firmware updater
- New for VARIPACK
  - Firmware version 1.26 integrated
- New for ECOSTAR
  - LHV5E/7E: Firmware version 5.0.2.0 integrated
- New for CM-RC-01
  - ECOLINE CO₂ compressors 6TME-35 and 6PME-40 added
  - Refrigerants R454C and R455A released for the ECOLINE compressors
    4FES 3 .. 8FE 70 and 4VE 6 .. 4NE 20
- New for IQ MODULE CM-SW-01
  - Firmware version 2.9.92.00 integrated
  - OS.A95 compressors
    - Compressors OSKA9573-K and OSKA9583-K added
    - Application envelopes for the compressors with serial number > XXX1098800000 extended in the right lower edge
  - HS.95 compressors
    - Compressor HSK9593-280 added
    - HSK.95 compressors released for the refrigerants R407A, R407F, R448A, R449A and R507A
- CSW105 compressors released for the refrigerants R513A and R1234yf
- New for SE-i1
  - Application envelopes for CSH.5 compressors with serial number > 1098800000 XXX extended according the leaflet SP-170-7
버전 2.12의 관련 혁신 기술
- Overworked Modbus Documentation
- Extended time duration for Livelogs
- New for CSV
  - Firmware version 2.00 integrated
  - Besides updating to the latest firmware version, it is now also possible to update or downgrade to older firmware versions
- New for VARIPACK
  - Firmware version 1.21 integrated
  - In conjunction with firmware version 1.21 or newer, a full reset to defaults can now be carried out via BEST
  - Compressors 6TME-35 and 6PME-40 added with the standard motor 40P
  - Compact screw compressors added:
    - CSH6553-35 .. CSH95113-320
    - CSW6583-40 .. CSW95113-320
    - CSHP6553-50 .. CSHP95103-320
- New for IQ MODULE CM-RC-01
  - Firmware version 2.9.258.00 integrated
- New for IQ MODULE CM-SW-01
  - Firmware version 2.9.89.00 integrated
  - Refrigerant R507A released for the HS.95 compressor
- New for SE-i1
  - Firmware version 2.4.117.00 integrated
버전 2.11(SP2)의 관련 혁신 기술
- Alarm documentation extended about the Alarm reset types
- Remember the myBITZER login
- New for VARIPACK
  - Compressor 4KTE-12 added
  - Motor versions 45S(Y), 40D(D), 20D(Y), 20D(D), 4SU(Y) and 2NU added for the compressors 4PTE-6 .. 4KTE-12
  - ORBIT scroll compressors for A2L refrigerants with motor version 4 added
    - ORBIT: GSD60120VL .. GSD80485VL (except GSD80235VL)
    - ORBIT+: GSU60120VL .. GSU80421VL
    - ORBIT Fit: GED60120VL .. GED80385VL
- Max. frequency for the compressors HSK7451-50 .. HSK8591-110 and HSN7451-60 .. HSN8591-160 extended from 67 to 75 Hz
- New for ECOSTAR
  - All: Firmware updates can now also be carried out via Ethernet as faster and more reliable solution compared to the USB stick
- New for IQ MODULE CM-RC-01
  - Compressor 4KTE-12 added
  - “.2 Generation” compressors (4FC-3.2 .. 8FC-70.2) added with the refrigerants R22, R404A, R507A, R134a, R407A and R407C to support the requests for system upgrades with IQ MODULEs and VARISTEP
- New for IQ MODULE CM-SW-01
  - Firmware version 2.8.821.0 integrated
  - Compressor HSK95103-320 added with the refrigerants R22 and R404A
  - Compressor HSN95103-280 added with the refrigerant R404A
- New for SE-i1
  - CSH.6 compressors CSH7673-70 .. CSH96113-320 added for the refrigerants R134a, R450A, R513A, R1234yf and R1234ze
  - Max. frequency for the compressors HSK7451-50 .. HSK8591-110 and HSN7451-60 .. HSN8591-160 extended from 67 to 75 Hz
버전 2.8(SP2)의 관련 혁신 기술
- VARIPACK의 새로운 특징
  - ECOLINE+ 컴프레서 4PTEU-6L~ 4KTEU-10L 및 4JTC-10L~ 4JTC-15L 추가
  - Delta에서 운영하기 위해 출시된 LSPM 모터 포함 컴프레서(40S-D)
- ECOSTAR의 새로운 특징
  - 펌웨어 버전 4.4.1.0 통합
- CM-RC-01의 새로운 특징
  - 펌웨어 버전 2.3.243.00 통합
  - 컴프레서 4FES-3~ 4BES-9 추가
  - ECOLINE+ 컴프레서 4PTEU-6L~ 4KTEU-10L 추가
- CM-SW-01의 새로운 특징
  - 컴프레서 OSKA9593, OSKA95103 및 CSW10593의 효율을 더욱 높이기 위해 슬라이더 계수 최적화
버전 2.8(SP1)의 관련 혁신 기술
- CM-SW-01의 새로운 특징
  - 컴프레서 CSW10593-400 및 OSKA9593-K 추가
  - 활성화된 OS.95 컴프레서용 오일 주입 밸브(터미널 스트립 CN4) 제어
  - 펌웨어 버전 2.6.58.00 통합
- SE-i1의 새로운 특징
  - 펌웨어 버전 2.0.101.00 통합
버전 2.8의 관련 혁신 기술
- 장치 로그를 위한 데이터 로그 기능 확장
  - 카운터 및 통계 데이터의 시각화
  - 표 형식의 경보 목록
- 새로운 언어
  - 덴마크어
  - 에스토니아어
  - 스웨덴어
- CSV의 새로운 특징
  - "모니터링" 탭에 새로운 진단 파라미터 도입
- VARIPACK의 새로운 특징
  - 컴프레서 선택을 위한 검색 기능
  - ECOLINE+ 컴프레서 4HTC-15L~ 4CTC-30L 및 6FTEU-35L~ 6CTEU-50L 추가
  - 냉매 R452B 및 R454B 추가
  - CO₂ 컴프레서의 주파수 범위 확장
  - GSD6 컴프레서의 주파수 범위 확장
- IQ 모듈 CM-RC-01의 새로운 특징
  - ECOLINE+ 컴프레서 6FTEU-35L~ 6CTEU-50L 추가
  - R407A, R407F, R448A 및 R449A의 사용 범위 확장
버전 2.7의 관련 혁신 기술
- 모든 장치에 대해 각각 현재 작동 조건 또는 Livelog의 그래픽 시각화
- 장치에서 다운로드한 데이터 로그의 그래픽 시각화
- SI 또는 IP 치수 단위 사용 여부 선택 가능(°C, bar 또는 °F, psi)
- 압력 값을 게이지 압력 또는 절대 압력으로 표시할지 여부 선택 가능
- 새로운 언어
  - 중국어
  - 핀란드어
- CSV의 새로운 특징
  - 펌웨어 버전 1.73 통합
  - 냉매 R513A 및 R1234yf에 적합하게 컴프레서 구성 가능. 이를 위해서는 펌웨어 버전이 1.73 이상이어야 함
  - 컴프레서 CSVH26-200MY-40M, CSVW37-240Y-40A 및 CSVW38-290Y-40A 추가
- VARIPACK의 새로운 특징
  - 냉매 R455A 추가
- ECOSTAR의 새로운 특징
  - 경보 도움말 텍스트 완전 개정
- CM-RC-01의 새로운 특징
  - ECOLINE 2, 4, 6 및 8기통 컴프레서용 냉매 R1234yf 추가
  - ECOLINE 2, 4 및 6기통 컴프레서용 냉매 R1234ze 추가
  - 펌웨어 버전 2.1.234.20 통합(CM-RC-01의 시리얼 릴리스 펌웨어 버전)
- SE-i1의 새로운 특징
  - CS.3 컴프레서용 냉매 R450A, R513A, R1234yf 및 R1234ze 추가
  - 펌웨어 버전 1.5.89.00 통합(SE-i1의 시리얼 릴리스 펌웨어 버전)
버전 2.6의 관련 혁신 기술
- VARIPACK 주파수 인버터 통합
- CM-SW-01 보호, 모니터링 및 제어 장치 통합
- 데이터 로그 기능
  - 데이터 로그 관리: 파라미터 설정과 함께 데이터 로그를 BEST 파일(.bpd)에 저장 가능
  - 라이브 로깅: 장치에 연결되어 있을 때 모든 작동 조건이 자동으로 로그에 기록되고 BEST 파일을 저장할 때 저장됨
  - Excel로 내보내기: 데이터 로그 파일을 Excel(.csv)로 내보낼 수 있음
- 이제는 오프라인 상태에서도 경보 도움말 텍스트에 접근 가능
- 새로운 언어
  - 프랑스어
  - 이탈리아어
  - 포르투갈어
  - 러시아어
- CSV의 새로운 특징
  - 컴프레서 CSVH37-240Y-40A 추가
- ECOSTAR의 새로운 특징
  - 주간 프로그램: 한 주의 각 요일에 대해 여러 가지 다른 온도 설정값과 팬 모드 구성 가능
- CM-RC-01 및 CM-SW-01의 새로운 특징
  - Bluetooth 지원
- 정보: Windows XP를 지원하는 마지막 버전의 BEST
버전 2.5의 관련 혁신 기술
- Windows 10과 호환 가능
- CSV의 새로운 특징
  - 펌웨어 버전 1.65 통합
- ECOSTAR의 새로운 특징
  - 현재 BEST를 통해 자가 테스트 기능도 제어 가능
  - 새로운 ECOSTAR LHV5E 지원
  - 펌웨어 버전 4.3 통합
- SE-i1의 새로운 특징
  - 예정된 펌웨어 버전 지원
  - 컴프레서 HS53~ HS85 추가(펌웨어 버전 1.0 이상으로만 적용 가능)
  - 냉매 R448A, R449A, R450A, R513A, R1234ze, R1234yf 추가(펌웨어 버전 1.0 이상으로만 적용 가능. 릴리스된 컴프레서와 냉매의 조합 구성 가능. 요청 시 다른 조합으로도 제공 가능)
- CM-RC-01의 새로운 특징
  - 예정된 펌웨어 버전 지원
버전 2.4의 관련 혁신 기술
- 자동 업데이트 기능
- CM-RC-01 보호, 모니터링 및 제어 장치 통합
- CSV의 새로운 특징
  - 컴프레서 CSVH38-290Y 추가
- ECOSTAR의 새로운 특징
  - Bluetooth를 통해 연결
  - 데이터 로그 다운로드
  - 자가 테스트 기능
  - 펌웨어 업데이터 통합
  - 펌웨어 버전 4.1.1.0 통합
  - ECOSTAR 네트워크 모드를 위한 기본 지원
버전 2.3의 관련 혁신 기술
- ECOSTAR 콘덴싱 유닛 통합(LHV5E 및 LHV7E)
- CSV의 새로운 특징
  - 펌웨어 버전 1.51 통합
  - 컴프레서 CSVW26-200MY-40M 추가
- VARISPEED의 새로운 특징
  - F1: 휴대형 장치로 컴프레서를 비활성화한 경우의 경고
버전 2.2의 관련 혁신 기술
- 새로운 설계로 완전히 재가공
- CSV 컴프레서 시리즈 통합
- SE-i1 보호 및 모니터링 장치 통합
- 이제는 탐색기에서도 BEST 파일(.bpd)을 열 수 있음
- VARISPEED의 새로운 특징
  - 새로 추가된 컴프레서: 4FE-5.F1Y, 4EE-6.F1Y, 4DE-5.F1Y, 4DE-7.F3Y, 4CE-6.F1Y, 4CE-9.F3Y, 4VE-7.F3Y, 4VE 10.F4Y, 4TE-9.F3Y, 4TE-12.F4Y, 4PE-12.F3Y, 4PE-15.F4Y, 4NE-14.F3Y, 4NE-20.F4Y
  - F3/F4: 순 공급 전압을 구성할 수 있는 기능 추가

국가와 언어를 선택하십시오:

BEST Software 모든 BITZER IQ 장치에 하나의 소프트웨어 사용

Delivery address

다음 제품이 지원됩니다