Bienvenido a BITZER

Grey cast iron, e.g.:
Screw compressor housings (40kg…670kg)
Reciprocating compressor housings (30kg...130kg)
Attachment Parts (e.g.: discharge flanges and covers, housing covers (up to 70kg))
Cylinder heads (up to 10kg)

Ductile graphite iron, e.g.:
Oil separator partial vessels (70kg…500kg)
Drive gear parts (e.g.: crank / eccentric shafts (up to 20kg), rotors (up to 150 kg))

Aluminum cast iron, e.g.:
Sand castings (e.g.: connecting rods (up to 5kg))
Mold castings (e.g.: reciprocating compressor housings (up to 16kg))
Pressure die castings (e.g.: terminal boxes (up to 2kg))

Steel forged parts (e.g.: flanges (up to 12kg))

Aluminum forged parts (e.g.: connecting rods (up to 0.5kg))

Pressed parts (e.g.: cable connectors)

Sintered parts

Laser parts and stampings

Sheet metal components (e.g.: sheet metal housings)

Formed parts (e.g.: deep drawn parts)

Wire meshes / Filters

Springs

Welded constructions

Machining of castings and forged parts

Turned Parts (e.g.: automatic turned parts, shafts, chuck turned parts, long turned parts (range of diameters: 8mm…300mm))

Milled parts

Sheet metals and pipes (0 count) Motors and fans (0 count) Electrical and electronic components (0 count) Valves (0 count)

Format sheet metals

Pipe laser and bending parts

Pipes of steel, copper and stainless steel (e.g.: seamless precision steel pipes and tubes, ripped pipes)

Built-in motors (e.g.: asynchronous and permanent magnet motors (2 pole and 4 pole))

Standard motors

Fans

Frequency inverters

Compressor and motor protection devices

Controllers and monitoring devices

Sensors (e.g.: temperature sensors, pressure sensors, differential pressure switches, oil level switches, position sensors)

Electrical lines / Cables and harnesses

Solenoid valves

Electronic expansion valves

Band heaters (e.g.: crankcase heaters)

Valve plates / suction reeds

Shut-off valves

Control valves

Schrader valves

Safety valves

Pressure relief valves / Overflow relief valves / Overpressure valves

Pistons and accessories (0 count) Bearings and bush parts (0 count) Heat exchangers and oil coolers (0 count) Gaskets and elastomers (0 count)

Aluminum and steel pistons

Piston pins

Piston rings

Slide bearing bushes

Thrust washers

Ball bearings

Roller bearings (e.g.: angular ball bearings, cylindrical roller bearings)

Plate heat exchangers

Air-cooled condensers

Oil coolers

PTFE gaskets

Metal-braced gaskets

Sliding ring seals (e.g.: sliding and stationary ring)

Soft material gaskets

O-rings

Glass-metall-connections (0 count) Plastic parts and die casting components (0 count) DIN and standard parts (0 count) Refrigerants and refrigeration compressor oils (0 count)

Terminal plates

Sight glasses

Plastic injection molded parts (e.g.: terminal boxes)

Thermoformed parts (e.g.: covering parts)

Insulation material (e.g.: vibration dampers)

Connecting elements

Fittings

Labels (e.g.: adhesive labels, name plates)

Parallel keys

Disc springs

Pipe clamps

Vibration dampers (e.g.: rubber dampers, spiral springs)

Sealing plugs / End caps (e.g.: sealing plugs with magnet)

Refrigerants

Refrigeration compressor oils

Surface treatment (0 count) Packaging (0 count) Oil pumps (0 count)

Varnishes / polishing materials

Primers

Coatings (e.g.: coating powders, zinc coatings)

Pallets (e.g.: wood pallets)

Carton boxes

Special packings

Packaging accessories

Mechanical oil pumps

Seleccione el país y el idioma:

SOLICITUD DE EMPLEO PARA PROVEEDORES

Delivery address

PASO 1: SELECCIÓN DE MATERIAL DE SERIE Y PROTOTIPOS