CS PRO series for process cooling (R290, R1270)

CS PRO series for process cooling (R290, R1270)

The compact screw compressors in this CS PRO design are designed to operate with the natural, low-GWP refrigerants propane (R290) and propene (R1270).
These models were primarily developed for process cooling applications with and without heat recovery and allow for liquid outlet temperatures from roughly -25°C up to +70°C. The CS PRO series differs from the standard CS series due to its special electrical accessories, oil charge, safety devices and internal lubrication system.
As propane and propene are flammable refrigerants in the A3 safety class, these compressors are only available to OEM contractors who have experience working with flammable refrigerants.

Refrigerant

Natural hydrocarbon refrigerants with low global warming potential
R290 & R1270, A3 safety class (flammable)

Product range

Models from 137 to 1120 m³/h at 50 Hz

Special requirements

Upon request, the CS PRO series can be supplied in a range of ATEX designs for installation in zones with explosion protection requirements.

General applications

Process liquid chillers for high, medium and low-temperature applications
- e.g.: Compliance with minimum efficiency requirements under EU 2015/1095
For industry-leading SEPR (Seasonal Efficiency Performance Ratio) values
With and without heat recovery
Low and medium-temperature heat pumps for liquid outlet temperatures up to approx. +70°C

Sectors

Building services industry
Automotive and mechanical engineering industry
Food and drink industry
Injection moulding industry
Chemical and pharmaceutical industry
Shipping and offshore industry
And many more …

Submit request

CE
Classification: ‘No sources of ignition in normal operation’
- In normal operation with no faults, the product and its components contain no sources of ignition that could ignite class A3 flammable refrigerants from Group IIA under IEC 60079.
Classification: ‘Durably technically tight’
- The product has increased tightness pursuant to EN 1127-1 and is therefore considered durably technically tight.
- If the product contains flammable gases, this classification means that no ATEX zone has to be assumed around the component.
EAC

Product versions

The compact screw compressors in this CS PRO design are particularly suited for use:
- with natural hydrocarbon refrigerants with low global warming potential like propane (R290) and propene (R1270).
for low, medium and high-temperature process cooling applications with and without heat recovery
- Liquid temperatures for process coolers in accordance with Regulation (EU) 2015/1095:
  - LT -25°C
  - MT -8°C
  - HT +7°C
for low and medium-temperature heat pumps with a liquid outlet temperature of up to approx. +70°C

Reduced life cycle costs

Outstanding efficiency in wide application range
Long lifetime due to high robustness and low-vibration design
Low maintenance costs due to service-friendly design
Global Service network for quick spare part availability all over the world

Reduced development costs

Extensive documentation and BITZER know-how for technical support
Wide range of matching accessories

Flexibility and reliability

Wide application range enables flexible use
- in a wide range of system configurations
- with mechanical capacity control or variable-speed drive
Optimized for operation with the natural low-GWP hydrocarbon refrigerants Propane (R290) and Propylene (R1270)
- Perfect coordination of refrigerant and compressor
- Hydrocarbon refrigerants are not subject to the European F-Gas Regulation EU 2024/573 and REACH Regulation 1907/2006 (PFAS)
All compressors are 100% factory-tested

Compressor-related accessories

Wide range of motors for different power supply voltages
Wide range of suction and discharge bushings and discharge gas shut-off valves
Adaptor and shut-off valve for economiser connection
SE-i1 compressor protection device for advanced compressor protection, monitoring and data log

System-related accessories

Liquid receivers for use with hydrocarbon refrigerants
- horizontal liquid receivers: F..P series
- vertical liquid receivers: FS..P series

Certifications
- CE
- Classification: ‘No sources of ignition in normal operation’
  - In normal operation with no faults, the product and its components contain no sources of ignition that could ignite class A3 flammable refrigerants from Group IIA under IEC 60079.
- Classification: ‘Durably technically tight’
  - The product has increased tightness pursuant to EN 1127-1 and is therefore considered durably technically tight.
  - If the product contains flammable gases, this classification means that no ATEX zone has to be assumed around the component.
- EAC
Features
Product versions
- The compact screw compressors in this CS PRO design are particularly suited for use:
  - with natural hydrocarbon refrigerants with low global warming potential like propane (R290) and propene (R1270).
- for low, medium and high-temperature process cooling applications with and without heat recovery
- - Liquid temperatures for process coolers in accordance with Regulation (EU) 2015/1095:
    - LT -25°C
    - MT -8°C
    - HT +7°C
- for low and medium-temperature heat pumps with a liquid outlet temperature of up to approx. +70°C
Benefits
Reduced life cycle costs
- Outstanding efficiency in wide application range
- Long lifetime due to high robustness and low-vibration design
- Low maintenance costs due to service-friendly design
- Global Service network for quick spare part availability all over the world
Reduced development costs
- Extensive documentation and BITZER know-how for technical support
- Wide range of matching accessories
Flexibility and reliability
- Wide application range enables flexible use
  - in a wide range of system configurations
  - with mechanical capacity control or variable-speed drive
- Optimized for operation with the natural low-GWP hydrocarbon refrigerants Propane (R290) and Propylene (R1270)
  - Perfect coordination of refrigerant and compressor
  - Hydrocarbon refrigerants are not subject to the European F-Gas Regulation EU 2024/573 and REACH Regulation 1907/2006 (PFAS)
- All compressors are 100% factory-tested
Accessories
Compressor-related accessories
- Wide range of motors for different power supply voltages
- Wide range of suction and discharge bushings and discharge gas shut-off valves
- Adaptor and shut-off valve for economiser connection
- SE-i1 compressor protection device for advanced compressor protection, monitoring and data log
System-related accessories
- Liquid receivers for use with hydrocarbon refrigerants
  - horizontal liquid receivers: F..P series
  - vertical liquid receivers: FS..P series

Please select country and language:

CS PRO series for process cooling (R290, R1270)

CS PRO series for process cooling (R290, R1270)